Worldwide

HALTENT
PARTY TENTS & LARGE MARQUEES

Party tents & large marquees MINI, MAXI, Quickflex

Our party tent and large marquee systems can be flexibly varied in terms of width, eave height and length. This allows you to tailor your tents individually to the respective event. Popular with marquee hire businesses, HALTENT party tents and large marquees are just what you need to grow your profit zone.

Additional bonus for your safety: all HALTENT party tents and large marquees are structurally certified and TÜV-approved according to the latest standards. Some systems are also suitable for coastal areas.

Enquire now

EQUIPMENT

Simple anchoring

A special notch on the profile allows the rubber expanders of the roof tarpaulin to be attached quickly and easily. A fixed tensioning cable is also possible for better tensioning of the tarpaulin on wider marquees.

Particularly smooth-running

Thanks to a special eave purlin profile, no additional tarpaulin tube is required, which allows for a very small gap width. The tarpaulins on our party tents and large marquees run smoothly and almost silently on awning rolls.

Unrestricted access

If you want all areas to be freely accessible, wind bracing crosses (see Fig. 04) or cables can be replaced with aluminium gantries.

Extra stable

In the MINI and MAXI party tents, anodised aluminium wind bracing crosses ensure extra stability. Plastic-coated ropes are used on the QUICKFLEX large marquee.

Extra wind protection

Optional ground tubes tension the side tarpaulins and prevent them from being damaged in windy conditions. The material is subjected to less stress and the tent has an even higher quality finish.

Individually or as a group

Where there are greater space requirements, e.g. for hospitality, tents can also be assembled side by side. The optional connecting tarpaulins can be used to create a single large space.

Technical data

"MINI"
PARTY TENT

"MAXI"
PARTY TENT

"QUICKFLEX" LARGE MARQUEE

Width

Side height

Length increments

3.0 m / 4.0 m / 5.0 m / 6.0 m / 8.0 m / 10.0 m

2.25 m

3.0 m

4.0 m / 5.0 m / 6.0 m / 8.0 m / 10.0 m / 12.0 m / 15.0 m

2.3 m or 3.0 m

3.0 m or 5.0 m

10.0 m / 12.5 m / 15.0 m / 20.0 m

2.4 m or 3.0 m

5.0 m

Tarpaulin material

Fabric tarpaulin, PU-coated on both sides, weighing approx. 650 g/m². High-gloss finish, waterproof and flame-resistant in accordance with DIN 4102-1:B1. High tensile strength, UV-resistant and treated with fungicide to prevent mould growth.

Frame material

Main profile made from anodised aluminium piping profile 95 x 46 x 2/5 mm, steel parts corrosion protected with hot-dip galvanising.

Main profile made from anodised aluminium piping profile 110 x 68 x 3 mm, steel parts corrosion protected with hot-dip galvanising.

Main profile made from anodised aluminium piping profile 170 x 88 x 3 mm or 176 x 90 x 4/6 mm, steel parts corrosion protected with hot-dip galvanising.

Structural analysisDIN EN 13782


DIN EN 13782, in some cases also available with statics for coastal areas