HALTENT pagodas can either be assembled individually or as a group to create an impressive marquee landscape. With its convenient slot-in system and simple assembly, the QUADROFLEX pagoda is also very popular with professional marquee hire businesses.
Additional bonus for your safety: HALTENT pagodas are structurally certified and TÜV-approved as single tents or as a group assembly.
The integrated clamping device and a stable plastic peg in the apex ensure the tarpaulin sits perfectly — which also supports the durability of the tent.
Stable corner joints made of hot-dipped galvanised steel make the HALTENT pagoda particularly stable. Even strong winds are no match for it.
Hanging the side tarpaulins with the piping strips is smooth, silent and virtually wear-free.
It is straightforward and easy to attach the roof tarpaulin using a piping attachment system. This also allows the tarpaulin to be assembled on the ground before the tent is erected. An optional aluminium clamping strip is available to buy with the pagoda.
Ground tubes tension the side tarpaulins and prevent them from being damaged in windy conditions. The material is subjected to less stress and the tent has an even higher quality finish. Ground tubes are available to buy with your pagoda as an option.
With a HALTENT pagoda, you are buying a safety-tested product. We are one of just a few manufacturers to have applied a wind load of 0.5 kN/m² to our statics, allowing HALTENT pagodas to also be assembled as a group.
The standard and most simple form of anchoring is ground pegs. If anchoring in the ground is not possible, various ballasting systems are available.
| Size | 3.0 x 3.0 m | 4.0 x 4.0 m | 5.0 x 5.0 m | 6.0 x 6.0 m |
| Side height | 2.2 m or 2.5 m | |||
Total height where SH = 2.2 m | 3.9 m | 5.0 m | 5.3 m | 5.5 m |
| Total height where SH = 2.5 m | 4.2 m | 5.3 m | 5.6 m | 5.9 m |
| Tarpaulin material | Fabric tarpaulin, PU-coated on both sides, weighing approx. 650 g/m². High-gloss finish, waterproof and flame-resistant in accordance with DIN 4102-1:B1. High tensile strength, UV-resistant and treated with fungicide to prevent mould growth. | |||
| Frame material | Main profile made from anodised aluminium keder profile 63 x 63 x 2 mm, steel parts corrosion protected by hot-dip galvanising. | |||
| Structural analysis | DIN EN 13782, optionally without statics | without | ||